The Apex Polymer Forward Set Sear and Trigger Kit features a solid polymer trigger body, with center pivoting safety. This kit will set the trigger break point farther forward than the factory trigger assembly as well as, significantly reduce the uptake and over travel (varies). It produces a trigger pull as close to a 1911 trigger as possible in a polymer frame pistol. The Polymer Forward Set Sear & Trigger Kit boasts a smooth trigger pull throughout the break. The rounded trigger face provides the user with a comfortable surface for the firing finger. The kit comes with 2 trigger return springs; one designed to produce a 4lb trigger pull, and one to produce a 5.5lb trigger pull. These two options give the end user the ability to customize their trigger pull for their specific needs.
Parts Included: 10 Pcs
- Apex Polymer Forward Set Trigger
- Forward Set Sear
- Ultimate Striker Block Kit Striker Block
- Striker Block Spring
- Talon Tactical tool forward set spring set
- Sear Spring
- RAM Spring (provided if you previously purchased a RAM, replace with this spring in the FSS)
- Trigger Slave Pin
- 4 lb Rated Trigger Return Spring
- 5.5 lb Rated Trigger Return Spring (painted Green)
Applicable to:
- All Smith & Wesson M&P Semi Auto Pistols - 9, 40, 357 Sig, and .45 ACP models included.
Not applicable to the M&P Shield.
Note: This particular product usually requires a slight modification to the trigger bar loop for proper function. This kit REQUIRES the use of the larger 1/8 inch sear spring & plunger set up.
IMPORTANT NOTE: "All Service and Warranty Issues Must Be Directed To Manufacturer."
