SEAR, DELUXE, BULLET PROOF®, A-2


SEAR, DELUXE, BULLET PROOF®, A-2
Rated 5/5 based on 30 customer reviews
$29.9500
Item Number: 314
 Review Average:  
 Number of Reviews: 30
 View ReviewsReview this item
$29.95
In Stock
Quantity 



Detailed Description


The sear is the heart of a fine trigger job...

  • Precision Wire EDM Cut from S-7 Tool Steel Bar Stock
  • Heat Treated for Maximum Hardness
  • Contact Surfaces are Ground to an Ultra Smooth 8 RMS Finish
  • Proper Design and Finish for a Fine Trigger Job
  • Used in All Wilson Combat Custom Pistols
  • Minor Fitting May Be Required

 

In the world of high-performance handguns, Wilson Combat® Bullet Proof® parts stand alone for performance, construction and value. All Wilson Combat® Bullet Proof® parts are CNC machined from solid steel billets and precisely engineered for an absolutely perfect fit-no cheap castings or inferior, imported injection molded parts will ever wear the Bullet Proof® name.

Wilson Combat® Bullet Proof® Parts Have Been Engineered To Be The Highest Quality, Most User Friendly And Toughest 1911 Parts Available

Bullet Proof® Parts Are CNC Machined From Billets Of The Finest American Tool Steels To An Exacting Set Of Stringent Tolerances And Proprietary Specifications Like All 1911 Parts Were Intended To Be

All Bullet Proof® Parts Are Guaranteed From Defects Or Breakage Forever, The Best Parts With The Best Guarantee In The Industry

Choose from over fifty Bullet Proof® parts to complete your dream custom 1911.



 Product ReviewsClick here to review this item
5
Incredible, high quality sear
Replaced all of the cheap MIM parts in my S&W E-Series with Wilson Bullet Proof parts. The sear was the cherry on top. Crisp, clean, glass break of a trigger. Best part of it is she dropped right in, no fitting required. Now I have an EDC I can trust with my life. Thanks Wilson!
 
3
works well, rusts quickly
I do love Wilson Combat parts, their quality and durability, but these bullet proof sears and disconnectors (#573) rust easily. I bought them to upgrade my Springfield 1911 Loaded. By the way, these sears and disconnectors do not fit the Springfield thumb safety and hummer, but they fit perfectly with the Wilson Combat hummer #299S and thumb safety #6SN. No fitting is required if you just install together #573 + #314 + #299S + #6SN into the Springfield frame using earthier original Springfield or Wilson Combat pins. I existed in these parts until my cleaning process. My cleaning process = ultrasonic cleaner + tap water rinse + compressed air duster (immediately) + gun oil bath + microfiber cloth wiping = clean parts which are covered by a thin oil layer. All my parts including Springfield stainless steel parts as well as Wilson Combat Bullet Proof parts as well as Wilson Combat stainless steel parts do not rust after a lot of my cleaning process sessions, but these disconnectors and sears get rusty after the first cleaning. As a result, -2 starts, looking for a substitution, still love other Wilson Combat parts.
 
5
No fitting required for my RIA ultra fs 10mm
Bought the bullet proof hammer and disconnect to go with this sear , top notch products
 
5
Amazing quality
This is a beautiful part, you can tell a lot of engineering and thought was given when designing it. For my Colt Govt though it was not drop in. The sear nose was too long. This is a good thing though as my gunsmith shaped it properly to the right dimensions.
 
5
This is a beautiful part!
Im in the process of upgrading all the internal parts on my Kimber Custom II to Wilson Combat parts. I installed the WC sear, along with a WC disconnect, sear spring, and firing pin spring. The sear is absolutely beautiful. Its probably the smoothest part Ive ever seen right out of the bag. It required some minor fitting of the thumb safety, but beyond that it dropped right in. Everything Ive installed has been of the highest quality. If you cant afford one of their guns, do yourself a favor and invest in their parts to upgrade your production gun. It will be the best investment youll ever make. Great parts and great service, Thanks Wilson Combat!
 
5
Added the Bullet proof sear to my R.I.A CS Rebuild
I used the Wilson B.P Sear along with a full set of bullet proof Wilson Combat parts to my Rock Island Compact 1911. Hand fit and polished everything. Now I have the greatest Auto pistol I have ever owned or fired. Smooth action feeds anything. OUTSTANDING QUALITY you can only get from Wilson!
 
5
Replaced my R.I.A sear W/ W.C Bullet proof Sear
Dropped right in, also used Bullet proof disconnect & hammer strut.. Action is so much smoother!
 
5
get piece for a ria 1911
I dropped this along with all other internal parts in my ria 1911. it was a great pistol from the start but now with all Wilson combat internals in it I love it!!
 
5
Very well machined!
When compared side by side with my stock Springfield sear it disgusted me that they would put something so terribly machined in a 1911! The Wilson sear however was perfect, no tooling marks very shiny and polished unlike the picture. It was worth the money. I matched it with an STI trigger, Wilson Spec Ops 9 hammer, and Wilson stainless steel disconnector. I was blown away at how it all was drop in and how crisp the trigger pull was! Thanks Wilson!
 
5
very nice
dropped right in, no fitting, along with the wilson trigger, disconnector & hammer, the trigger pull was clean & crisp. my groupings became tighter as a result. big improvement over the stock colt sear.
 
5
Love It
150% improvement with Wilson hammer
 
5
Great part!!
Went with this sear & a Bullet Proof disco. Only 2 minutes fitting on my safety & it works like a dream. Wilson has done good!
 
4
great drop in part
Install with a bulletproof hammer for a trigger with a clean break. I had to take a little bit off the thumb safety engagement surface to get it to work with this sear. SA TRP Operator.
 
5
Wow!
I just got the Bullet Proof Deluxe Sear and Wow was I Pleased. Very High Quality, Beautiful! Almost no work required. Ill be putting this in my other 1911 soon.
 
5
Wilson has no competition
Crisp, Clean Un matched break. Do the whole wilson trigger job. You will have a whole new gun 10 times better.
 
5
Superb!!!
...a little polish there, a little there, drop it in, but.... for superb, better, best, marvelous results... drop it all in a Wilson Combat Bulletproof! No worries! My baby is a lot more crispier than ever! Love it!!!
 
5
high quality, precision components
I replaced the cheap internals: safety, sear, disco, slide release, mag release and extractor on my Colt 1991 with Wilson Bulletproof parts. After minor fitting, safety checks and live fire testing I now have a pistol that I can count on.
 
5
Ultra clean break!
I replaced all my trigger components in my S&W with Bullet Proof parts and set the trigger to 3.25 lbs. Factory pull was about 4.75 and had a clean break. I was speechless after I got my gun back from my local gunsmith Clint at Coyote Creek in Rochester MN. These parts are amazing! I had a knowledgeable customer next to me give it a few pulls and he said “Wow, now that’s an amazing trigger. . . WOW”. Ultra clean break with this Sear and Disconnector! Great parts!
 
5
RIA 1911-A1 CS PRODJECT
Supper part , matched nice with the commander hammer I had gotten . It feels like a differrent gun , nice & crisp !! Thanks WC !!
 
5
Great fit
Dropped right in my Springfield Armory 1911, replaced mil spec parts all with Wilson Combat bullet proof parts. Very crisp trigger pull.
 
5
Hands Down Choice
I have build my fair share of 1911s, I started using WC parts in all my build and havent looked back since. This Sear is nothing less than perfect, I took it out of its package and put it directly on my fitting jig, I did not have to do one thing to this sear!! it was perfect. I dropped it in along with a Bullet Proof hammer and it instantly gave it a crisp clean trigger!!! I will no longer use any other parts for a build! Thanks again WC!!!
 
5
Best Sear Available
I purchased this sear to use with a Wilson 337B hammer and ultra light match trigger. The results were nothing short of amazing. The sear is of high quality, and fit and finish were excellent. All contact surfaces where correctly cut and highly polished. Everything about this sear says quality. Will be purchasing more for future builds.
 
5
Great combination with the 337B hammer
The A2-Sear required minor fitting with my Springfield Trophy Match, but works perfectly. In combination with the 337B Hammer, trigger pull is crisp and without any creep, and the trigger breaks at around 2 1/2 - 3 pounds. Ive put some hundred rounds through the gun for a live-fire safety and function test - no problems at all, the trigger is just as I always wanted it to be. Excellent job, Wilson Combat!
 
5
Great quality
This sear is great! Paired with a Wilson Combat hammer on my recent trigger job. I was worried because I didnt have the tools to dial in the pitch of the sear but it was done for me. I wish manufactures used quality parts like this in their pistols. Used in my Kimber Ultra CDP II with no modifications
 
5
Obvious this is a quality part
You can see the quality in craftmanship in this part. Minor fitting but well worth the price and then some
 
5
Great Part
I just finished installing and test firing my Colt Defender. Installed this sear and the hammer and dis connector that goes with in . Itwas a drop in on my Colt and all safety checks performed and passed . I now have a new trigger that is worth the money . If you buy the sear get every thing and do the full job.
 
5
Nice High Quality Sear
This sear is far better than my stock one. I installed this along with WC Ultralight Hammer and it function very well. the material that they use on making this sear is really good and beefy. It really does look like its bullet proof. It required some minor fitting to fit my Loaded M1911-A1. but other than that its been functioning right. Highly recommended...
 
5
Best choice
Bought this sear to match the 299 hammer and just dropped them in my Kimber Pro Carry II and trigger pull set at 31/2 lbs. Clean break no creep. I am all smiles.. You cannot go wrong with the quaility parts from Wilson Combat, great job!!!
 
5
great part
just put into my colt great fit and function
 
5
easy easy easy
Dear dropped right in my Auto Ordnance 1911, yet another great product from WC. Cant wait to go shoot it