NOT a Steel Magazine. Lightweight polymer body is impact resistant from -40F to 180F, won’t dent like steel and weights the same as aluminum
The L5AWM fills the gap between the current metal and polymer magazine designs combing the best features from both designs into a unique hybrid magazine. L5AWM has the reliability of a steel magazine, the durability of a polymer magazine and the weight of an aluminum magazine.
Unique to the AWM is the one piece wrap-around hardened steel feed lip assembly that is permanently attached to an impact resistant polymer body. The hardened steel feed lips won’t bend, break or deform due to rough handling or long term storage.
An aggressive surface texture has been applied to the polymer body to improve gripping and retrieval from pouches. The combination of steel and polymer result in a lightweight, robust magazine tough enough for professional use.
The internal geometry of the Advanced Warfighter Magazine is a constant curve that has been maximized to feed the 5.56X45mm NATO round and has a non-tilting follower for trouble-free feeding. The feed lips are made from a single piece of precision formed steel that is hardened, then PTFE coated for corrosion resistance. The body and component materials are corrosion and chemical resistant, passing military chemical testing, including exposure to DEET.
The L5 AWM is compatible with modern weapon systems; M4/M16/AR, HK416, SCAR16, and the ARX160 to name a few and is available in 10, 20 and 30 round capacity with a translucent or opaque polymer body.
Note: We only offer this mag in Translucent Smoke.
Warranty: All Lancer Systems magazines are 100% warranted against manufacturer’s defects. Defective magazines will be repaired or replaced at the sole discretion of Lancer Systems. Unauthorized modifications or deliberate abuse will void warranty.
EXPORT RESTRICTIONS: These parts are a United States Munitions List (USML) item, Section 121.1, Category I(h) and is subject to ITAR requirements that can be found in Subchapter M, Title 22, Code of Federal Regulations, Parts 120 through 130 (22CFR 120-130). A license from the US Department of State is required to Export these products.
NOTE: Not available for shipment to: CA, CO, CT, HI, MD, MA, NY or Washington DC and may be restricted in other local jurisdictions. It is the customer's responsibility to be aware of and abide by all applicable local laws. Check your local city, county and state laws before ordering.