Wilson CombatŪ Ultima-Lube II is a blend of petroleum and synthetic lubricants specially formulated to insure optimal performance of any firearm and inhibit wear.
Ultima-Lube II Oil
Thin Viscosity, Penetrates Hard to Get to Areas
Ideal for Cold Weather Use
10° to 350° F Temperature Range
Recommended for Tightly Fitted Handguns of All Types
Wilson CombatŪ Ultima-Lube II is a blend of petroleum and synthetic lubricants specially formulated to insure optimal performance of any firearm and inhibit wear. The unique blend of lubricating fluids has proven ideal for today's high-tech semi-auto weapons, whether manufactured of conventional steels, aluminum alloys or stainless steel. In addition, we have found nothing superior to Ultima-Lube II for the proper lubrication and protection of the hand-fit custom firearms that Wilson CombatŪ is known for.
Ultima-Lube II is Available in Three Formulations:
Ultima-Lube II Oil - Thin viscosity penetrates hard to get to areas. Ideal for cold weather use, 10° to 350° F temperature range. Recommended Uses: Tightly fitted handguns of all types.
Ultima-Lube II Universal - All purpose lube for all types of firearms. Stays put under extreme conditions, 40° to 350° F temperature range. Recommended Uses: Service pistols/revolvers and broken-in custom handguns, Long guns of all action types, AR style rifles in the 20° to 50° F temperature range.
Ultima-Lube II Grease - Ideal for heavy wear areas. Stays put under extreme conditions, 40° to 350° F temperature range. Recommended Uses: Full and Semi-Auto rifles and carbines, Optimal in AR style rifles at temperatures above 50° F.
General Recommendations on Lubricating Firearms:
ALWAYS wear safety glasses when disassembling or reassembling any firearm!
Do NOT over lube!!!
Once your firearm is broken in, lube only those areas where you see visible wear, lubricating areas that don't have contact will only attract debris and fouling.
After lubrication and re-assembly, cycle the firearm several times and wipe off any excess lubricant that may seep out. If you have lubed properly this should be minimal.
For firearms that will be used at constant temperatures below 10° F, we recommend you use a very light coat of a very thin lubricant like Break Free CLP or FP-10.
There are some products out there that live up to expectations, and then there are those that surpass them. This is one of those products. I used this in an AR-15 rifle that had sand constantly swept into it all day, and did not have a single hic-up. IMHO, it made the action and BCG work just as smooth, or better than, the NiB rifles I have shot.
- Jim,
Look No Further
Date Posted: 1/6/2011
Over the years I have used many different oils that were advertized as; The best there is and The highest quality. While performing all right none of these oils never quite filled the bill. A friend told me to try out Ultima-Lube II and I would not be disappointed. I admit I was skeptical but I bought a bottle and gave it a try. So far, after a few thousand rounds, I have found Ultima-Lube to be everything they advertize and more. After a hard day at the range when I break my pistols down for cleaning I can still find the Ultima-Lube doing its job. While other oils may run Ultima-Lube II stays put and does the job.
- Bruce Grafton,
It does what Bill recommends it does-
Date Posted: 12/20/2010
I just purchased lube and oil products for my 45. The shipping was very fast, accurate with my goods, and actually does what Bill recommends it does- the best oil and lube for the heat here in Arizona. I highly
recommend any Wilson products, because their customer support is great and I will return to buy other products and a custom Elite Professional when I
save enough money for it. Thanks Wilson Combat and God Bless, Rocco USMC Lcpl. Ret.
