Wilson CombatŪ Ultima-Lube II is a blend of petroleum and synthetic lubricants specially formulated to insure optimal performance of any firearm and inhibit wear.
Ultima-Lube II Oil
Thin Viscosity, Penetrates Hard to Get to Areas
Ideal for Cold Weather Use
10° to 350° F Temperature Range
Recommended for Tightly Fitted Handguns of All Types
Wilson CombatŪ Ultima-Lube II is a blend of petroleum and synthetic lubricants specially formulated to insure optimal performance of any firearm and inhibit wear. The unique blend of lubricating fluids has proven ideal for today's high-tech semi-auto weapons, whether manufactured of conventional steels, aluminum alloys or stainless steel. In addition, we have found nothing superior to Ultima-Lube II for the proper lubrication and protection of the hand-fit custom firearms that Wilson CombatŪ is known for.
Ultima-Lube II is Available in Four Formulations:
Ultima-Lube II Lite Oil - Very low viscosity. Ideal for extreme cold weather use. Recommended Uses: Tightly fitted handguns of minor caliber.
Ultima-Lube II Oil - Thin viscosity penetrates hard to get to areas. Ideal for cold weather use, 10° to 350° F temperature range. Recommended Uses: Tightly fitted handguns of all types.
Ultima-Lube II Universal - All purpose lube for all types of firearms. Stays put under extreme conditions, 40° to 350° F temperature range. Recommended Uses: Service pistols/revolvers and broken-in custom handguns, Long guns of all action types, AR style rifles in the 20° to 50° F temperature range.
Ultima-Lube II Grease - Ideal for heavy wear areas. Stays put under extreme conditions, 40° to 350° F temperature range. Recommended Uses: Full and Semi-Auto rifles and carbines, Optimal in AR style rifles at temperatures above 50° F.
General Recommendations on Lubricating Firearms:
ALWAYS wear safety glasses when disassembling or reassembling any firearm!
Do NOT over lube!!!
Once your firearm is broken in, lube only those areas where you see visible wear, lubricating areas that don't have contact will only attract debris and fouling.
After lubrication and re-assembly, cycle the firearm several times and wipe off any excess lubricant that may seep out. If you have lubed properly this should be minimal.
For firearms that will be used at constant temperatures below 10° F, we recommend you use a very light coat of a very thin lubricant like Break Free CLP or FP-10.
The entire range of WC oils are simply put the best on the market. You only need the best so choose the oil best suited to your environment and firearm application.
- chris mcgivern, TX
I am a person who cleans my guns regularly. I even clean more than usual. while I was a deputy sheriff I cleaned my gun daily.i have been using the oil and lube for several years.it is just plain really good stuff and I am still using ultima lube 11.
- robert holley, TX
Best oil ive ever used
I bought this to lubricate my new 1911 45 ACP with. I used a different lubricate when i did the first cleaning and the Wilson Combat Oil is way more effective, not to mention it makes the gun run smoother.
- Nathan Hammel, MO
Simply the best Ive found
I absolutely love this stuff! The red tint makes application easy, and better yet over application difficult. Just the right mix of viscosity so it doesnt run for the hills as soon as it hit the piece. Really smooths up the action, doesnt require a great deal either and it doesnt gum up in the cold which up here in minnesota is a REAL problem or over long shooting sessions. Do yourself a favor and always keep a bottle handy
- Jesse Pageant, MN
It does what Bill recommends it does-
I just purchased lube and oil products for my 45. The shipping was very fast, accurate with my goods, and actually does what Bill recommends it does- the best oil and lube for the heat here in Arizona. I highly
recommend any Wilson products, because their customer support is great and I will return to buy other products and a custom Elite Professional when I
save enough money for it. Thanks Wilson Combat and God Bless, Rocco USMC Lcpl. Ret.