 |
Bullet Proofing my Kimber |
Date Posted: 4/24/2012 |
| I am replacing all the MIM parts on my Kimber Warrior with Wilson Combat BulletProof parts. The extractor dropped right in. No tuning or fitting were required. |
| - Mike Ni, |
| |
|
The best 1911 extractors! |
Date Posted: 2/12/2012 |
| I use WC extractors exclusivly in all custom builds. Their quality is of the highest standard. Thanks WC! |
| - Benjamin Baham, |
| |
|
KIMBER FIRES NO FTE |
Date Posted: 11/28/2011 |
| The extractor alleviated my FTE problem, before each time I fired a magazine it would fail to extract the round, changed ammo first, tried different magazine, nothing worked except the wilson extractor. Ran 200 rounds through it with wilson extractor and no more FTE. Thank you Wilson Combat |
| - Gary Rader, |
| |
|
Cured my Kimber |
Date Posted: 11/2/2011 |
| I was having frequent FTE problems with my Custom TLE II.The stock extractor was poorly machined,so I installed a WC Bulletproof.This pistol has since run flawlessly for years!The fit with the firing pin stop is superb.Thanks! |
| - George Riley, |
| |
|
The best extractors, period! |
Date Posted: 7/21/2011 |
| Replaced the loose fitting firing pin stop on my Kimber Ultra Carry that was causing extractor clocking. Also replaced the extractor while i had it apart. The Kimber part was poorly machined with chatter marks all over. The Wilson Combat part was perfect and far superior in craftsmanship. |
| - SC, |
| |
 |
Bullet Proof Extractor |
Date Posted: 4/6/2011 |
| I was having some trouble with my 1911 and immediately thought to order a new extractor from Wilson Combat. I have, in the past used their Bullet Proof line of products and found them exemplary. This extractor continues the fine tradition of the BP line. |
| - Ron Walsh, |
| |
|
perfect |
Date Posted: 3/4/2011 |
| installed it with no issues.. no tuning was needed.. dropped it in for it to be perfect... had to file on the slide stop just a little and took some extra off the back for a flush fit to the back of my slide but great product highly recommened it. |
| - Ryan shipes, |
| |
|
A high quality extractor is a must....... |
Date Posted: 2/26/2011 |
| .....and these wont disappoint. A gun that doesnt work is little more than an attractive hunk of metal. Spare parts are an absolute must for any 1911 and no kit is complete without a spare extractor or two since its most likely going to be the first part to go out on your gun. Keep your down time to a minimum by having one of these handy thats already fitted, tensioned and ready to go. All parts wear out eventually but Ive found these to outlast the competition. Dont gamble on the quality of your highest wear part, buy Wilson Bullet Proof. |
| - Paul Q, |
| |
|
100% Cured the problem with my Springfield V10 compact |
Date Posted: 12/24/2010 |
| Previously I could not get more than two rounds out without a failure to extract or stovepipe. After installing the Bulletproof extractor I shot over 100 rounds without fail. Awesome product and quality. I highly recommend this product if you are experiencing extraction or feed problems with your 1911. |
| - Garry Yaworski, |
| |
|
When You Want to Extract the Best from your 1911........ |
Date Posted: 12/10/2010 |
| Wilsons Bullet Proof extractors are spectacular. A friend was having some issues with the stock extractor in his Kimber and asked me for help. I installed a Wilson and the Kimber has been working perfectly ever since. If you dont own a Wilson, how do you improve the function and reliability of your 1911? Have Wilson parts installed by a competent gunsmith; this is a no-brainer. |
| - K Hutchison, |
| |
|
Having extractor problems? Here is the cure! |
Date Posted: 8/9/2010 |
| I recently purchased the Wilson Combat Bulletproof extractor to the replace the less than impressive stock unit on my Springfield Armory Mil Spec, after a minor amount of tuning, it works wonderfully in my gun, not only does it offer more reliable extraction, it also fits a lot more snugly to the firing stop than the factory part.
Overall, I think this is a well made, durable, and extremely functional part for any 1911, I would wholeheartedly recommend it. |
| - Chris Guthary, |
| |
