Introducing the new Bill Wilson Signature Jacketed Match load from Wilson Combat Custom Ammunition-Guaranteed Accuracy and Performance
The new Bill Wilson Signature Jacketed Match Load delivers economical match-grade GUARANTEED Accuracy and peerless overall performance to handgun shooters looking for the practical edge over the competition.
The Signature Jacketed Match uses the 125 grain Hornady Action Pistol (HAP) jacketed hollow point bullet-designed for X-Ring accuracy along with ultimate feed reliability. Low-flash, low-concussion powders and the HAP's encapsulated base create less visible blast and smoke during shooting than a typical full-metal-jacket bullet-a great advantage in dim-light or indoor conditions.
At a measured velocity of 1075 feet-per-second, the Bill Wilson Signature Match load is the ideal training or competition load for shooters seeking to achieve "Minor" power factor without excessive recoil, undue wear and tear on your handgun or impacting your accuracy.
The Signature Jacketed Match 9mm load has been extensively tested in 1911 style and other high-performance firearms and is the most accurate 125 grain 9mm ammunition available. We guarantee the Bill Wilson Signature Jacketed Match to shoot 25 yard, ten-shot groups through a fixed barrel testing device of under ONE-HALF (1/2) INCH-GUARANTEED.
Bullet: 125 gr. Hornady HAP (Hornady Action Pistol)
Velocity: 1075 fps
Muzzle Energy: 320 ft-lbs.
Test Barrel Length: 5"
Quantity Per Box: 5 Boxes of 100
Ammunition is restricted from sale to DC, IL, MA, NJ, CT, and NY. For other locations you must be 21 or older to purchase handgun ammunition. For safety reasons, we do not accept returns on ammunition.
All ammunition is considered hazardous and will be shipped UPS ground in the contiguous 48 states only to a verified street address. Ground shipping charges will be calculated and added based on UPS actual rates.
All Wilson 9mm pistol ammunition is loaded to maximum overall length for optimized feed reliability in custom, high-performance 1911 platform pistols. If your pistol's chamber is not reamed to appropriate SAAMI specifications, bullets may wedge in your pistol's rifling when chambered making loaded rounds difficult to eject.
We have had case reports of bulged cases from our ammunition fired in S&W Shield handguns. Upon further inspection it was found that many of these pistols have unsupported chambers and are not safe for +P ammunition.